|
Electric
#1
Number of Circuits: 24, twofered
Circuit numbers: 39-62
Location: Lineset #5, 4' 6" from Proscenium
Electric #2
Number of Circuits: 24, twofered
Circuit numbers: 63-86
Location: Lineset #17, 13' 10" from Proscenium
Electric #3
Number of Circuits: 24, twofered
Circuit numbers: 87-110
Location: Lineset #27, 21'10" from Proscenium
Electric #4
Number of Circuits: 24, twofered
Circuit numbers: 111-134
Location: Lineset #37, 29' 10" from Proscenium
6 Mobile Drop circuit boxes
Number of Circuits per box: 8
Circuit numbers: 141-188
Box Booms
Number of Circuits: 6 House Right, 6 House Left, twofered
Circuit numbers: 27-32, 33-38
Location: 44' 6" throw to CL/Plaster Line (from bottom
position)
Angles from 30 to 45 degrees
Photo of Stage Right box boom, and the angle to the stage
Front of House Beam Position
(Position is a continuous run from House Right to House Left. Circuiting is grouped into Three (3) blocks.)
Circuit numbers: 1-26
Number of Circuits: 26
Location: 50' throw to plaster line
60 degree angle
All circuits are wired dimmer-per-circuit into a Dual ETC Sensor SR48+ Rack located in the Backstage work area. All circuits are 2.4Kw, and terminate in 3-pin stage pin receptacles. In addition to our hardwired circuits, we have an ETC 24 circuit 1.8 kW SmartPack Touring Rack available. There is a 400Amp Show Power Disconnect in the Upstage Left corner for connection of this or other portable dimming equipment. Connection may be made via bare-wire or thru the use of Cam-Lok connectors.
All dimmers are DMX512 controllable via an ETCNet2 network system, if your system is not ETCNet2 compatible we will provide a Multi-port Gateway for access into the system. There are network jacks distributed throughout the facility, including the house booth, spot booth, backstage Stage Managers Panel (SMP), four on the grid, box booms, balcony rail and FOH catwalk. If you wish to use the system to distribute your DMX to any of these locations be aware that the building only owns one fixed Gateway at the SMP and one portable Gateway, please plan accordingly or bring your own compatible Gateway. The system is a POE system.
.........................................................................................................................
Lighting Inventory
- 24 ea. ETC Source 4's @ 19 degree configuration.
- These instruments are
normally dedicated to the Beam position. They may be moved as needed, but are our best suitable
instruments for FOH washes.
- 96 ea. ETC Source 4's @ 575w instruments (can be
configured with the following lens tubes)
- 4 ea. S4 50deg lens tubes
- 58 ea. S4 36deg lens tubes
- 47 ea. S4 26deg lens tubes
- 56 ea. Source 4 PARs with Very Narrow, Narrow, Medium, and
Wide Lenses
- 4 ea. 6 X 12 Altman 360Q Ellipsoidal with gobo slot @
1kw FEL
- 4 ea. 6 X 9 Altman Ellipsoidal with gobo slot @ 750 EHG
- 4 ea. 6" Fresnels
- 6 ea. 4 cell Sky-Cyc Lights @1000 FCM
- 6 ea. Mini Floods @ 1000w FCM
- 50’ rope running lights
- Control Booth:
-
2 ea. Lycian M2: Model 02040, Medium Throw Lens (2500W) Matched
-
2 ea. Orbitor Long Throw Follow Spots
@ 300 watts (EZT Marc 350GT Lamps) *not matched
- 2 Spotdot 2000 magnetic laser sights
Dimmer System
-or-
HOUSE LIGHTS
- ETC Unison Control System
- Dimmer Location: Backstage work area
- Control Locations: Various
STAGE MANAGERS CONTROL STATION (DSR)
- Clock and Timer
- Net3 4 port gateway
- Unison URLCD L.C.D. Panel
- ETC SMARTFADE 12/48 Control Console
- Clear Com Connection and call light
|
